Comparative Analysis of Business Analysis and Business...

A COMPARATIVE ANALYSIS OF BUSINESS ANALYSIS (BA) AND BUSINESS PROCESS MANAGEMENT (BPM) CAPABILITIES Paul Mathiesen, Faculty of Science and Technology, Queensland University of Technology, Brisbane, Australia, p.mathiesen@connect.qut.edu.au Wasana Bandara, Faculty of Science and Technology, Queensland University of Technology, Brisbane, Australia, w.bandara@qut.edu.au Houra Delavari, Faculty of Science and Technology, Queensland University of Technology, Brisbane, Australia, h.delavari@qut.edu.au Paul Harmon, Business Process Trends, 1819 Polk Street #334, S an Francisco, CA 94109, USA, pharmon@sbcglobal.net Kevin Brennan, International Institute of Business Analysis, 3605 Sandy Plains Road, Suite 240-193, Marietta, GA 30066,†¦show more content†¦To make matters even more confusing, there are those within the Business Analyst community who have begun to distinguish between business analysts who focus on defining software requirements and those business analysts who are focused on improving business processes. SAP, for example, has set up a website1 for Business Process eXperts (BPXs), a group of analysts with more extensive business process capabilities. This vagueness between BA and BPM roles creates confusion in practice and academia, which impacts on role designs, skills assessment, human resource development, recruitment and professional development. The impact of such was made clear at a Leonardo Process Days 2010 conference panel where BA and BPM role differentiation was reviewed. An outcome of this discussion was a consensus that i) Practitioners struggle to recognise and articulate the skills required (BA, BPM or both?) for various organisational initiatives and how to locate appropriate talent to fill these roles ii) Academics fail to position BA and BPM as separate professions and often bundle them as the same in their course descriptions and marketing iii) Students and prospective candidates for employment vacancies therefore remain confused about the specific skill sets required of a BPM professional a nd/ or a Business Analyst. Both the BA and BPM professions have made attemptsShow MoreRelatedMarketing Strategic Planning : Marketing Strategy1042 Words   |  5 Pages2.4 MARKETING STRATEGIC PLANNING PROCESS Marketing strategic planning is a management tool to help the organization does better work and understand how to compete for the future. It is a guiding process for the members of an organization developing them necessary procedures and operations in the future. Like a decisions strategy for the organization process, as the process of growing and maintaining a strategic fit between target of organization and capability and it’s changing marketing opportunitiesRead MoreWalmart Swot Analysis : Walmart Essay984 Words   |  4 PagesWALMART ANALYSIS 1 WALMART ANALYSIS 5 Business Process Management Hieu Le Columbia Southern University Walmart Analysis Walmart is the largest supply chain in the world which distributes different products of multiple firms. For the last fifteen years, Walmart has grown significantlyRead MoreSmes, Family Involvement, And Financial Management1580 Words   |  7 Pagesand Financial Management In the Philippines, MSMEs can be considered as the backbone of the economy as they are major contributors of job creation and play a vital role as providers of goods and services to large firms. In fact, 99.6% out of 941,174 establishments in 2013 are micro, small, and medium enterprises. However, the attrition rates for startup MSMEs in the country can go as high as 50 percent, which means that many MSMEs are having a difficult time keeping their business alive. AccordingRead MoreGartner - IT Key Metrics Data 2014 - Key Infrastructure Measures - Storage Analysis- Multiyear - 2013 12 16628 Words   |  3 PagesThis research note is restricted to the personal use of toby.reid@hds.com G00258880 IT Key Metrics Data 2014: Key Infrastructure Measures: Storage Analysis: Multiyear Published: 16 December 2013 Analyst(s): Jamie K. Guevara, Linda Hall, Eric Stegman This research contains high-level storage cost efficiency and support staff productivity ratios for organizations managing operations internally. Information provided was collected between 2009— 2013 from a global audience. Key Findings Read MoreQuestions On The Business Intelligence1618 Words   |  7 Pages1. Define and explain Terminologies? Business Intelligence: In my opinion the Business Intelligence means the procedure of taking substantial and also mixing of Knowledge, Data analysis, Technology that which may runs business opinions and views to reach their requirements that which leads to get a solution that which is Enterprise’s Growth and success IT Agility: My opinion IT Agility is a type of Methodology that suits dynamically and are changing their user eligibilities into their solutionsRead MoreStrategic Human Resource Management1738 Words   |  7 PagesHUMAN RESOURCE MANAGEMENT Strategic human resource management is the process of linking the human resource function with the strategic objectives of the organization in order to improve performance. Strategic management The word ‘strategy’, deriving from the Greek noun strategus, meaning ‘commander in chief’, was first used in the English language in 1656. The development and usage of the word suggests that it is composed of stratos (army) and agein (to lead). In a management context, the wordRead MoreRelational Databases For An Efficient Data Management And Retrieval Of Data1032 Words   |  5 Pages1 Introduction Since 1960 and beyond the need for an efficient data management and retrieval of data has always been an issue due to the growing need in business and academia. To resolve these issues a number of databases models have been created. Relational databases allow data storage, retrieval and manipulation using a standard Structured Query Language (SQL). Until now, relational databases were an optimal enterprise storage choice. However, with an increase in growth of stored and analyzedRead MoreThe Role Of Management Accounting And Management1461 Words   |  6 PagesThe development of management accounting and management accountants in much of society have been changed. In this paper, we will discuss the hybridisation and change in nature and role of management accounting and management accountants. The Evolution of Management Accounting From 1981 onwards, the Management Accounting Practices Committee outlines the definition of management accounting to ‘the process of identification, measurement, accumulation, analysis, preparation, interpretation, and communicationRead MoreCompetitive Strategy For International Trade Opportunities1203 Words   |  5 PagesInnovation of the Business Model 2 Week 5: CAGE framework to evaluate international trade opportunities 3 Reference List 4 â€Æ' Week 3: What is Strategy? According to Abraham, (2012) the word strategy mainly originated from the Greek word Strategoes that means about the art in general. Moreover, it is the analysis of the project with the help of the direct campaigns. Apart from this, Eiriz, Faria, and Barbosa, (2012) commented that it is one of the styles of the thinking and the process to do the intensiveRead MoreThe Effect Of Management Control On Family Firms1491 Words   |  6 Pagesstudies across different fields such as accounting, finance, and management. This is most probably due to the fact that family firms account for the majority of business and employment worldwide (Tharawat, 2014). At the same time, most family firms have specific characteristics and practices that studies have yet to dwell on. While these and other considerations have recently led to more research on management accounting and management control in family firms, research on this topic is only recently

Essay on National Security At What Price - 2051 Words

National Security: At What Price Never has information played a more important role in society than it does today. The advent of the Internet has made the distribution and collection of information easier and faster than ever before. Today, the Internet is used for communications, shopping, management, and even financial transactions. Despite the slowing economy, recent years have seen a large increase in Internet usage by corporations, and research indicates that this trend will likely continue. Figures gathered by eMarketeer indicate that Internet based commerce will reach as high as $2.4 trillion by 2004 (B2B). With easy access to information from anywhere on the globe, safeguards must be taken to protect sensitive data from†¦show more content†¦Congress). It is argued that such a scheme could improve national security by allowing the FBI to more easily trace terrorist communications (Schwartz). While the Congress recently eased restrictions of encryption software (US Encryption), the recent eve nts of September 11th have brought the issue of regulation back into question. As our nation faces the threat of additional terrorist actions, we must consider every opportunity to protect ourselves and the rest of the world. Despite the possible benefits to national security, many businesses and organizations stand opposed to any government involvement. Some consider a government controlled system unwieldy and potentially dangerous (Abelson), while others claim that government access to encrypted data violates our right to privacy (US Policy). Even if controls were imposed, cryptography software exists worldwide and would not be under the control of the US government. Recent advances in technology have made possible powerful network sniffers which can be used to intercept Internet transmissions. These systems raise additional questions regarding privacy and encryption. The FBI and other government agencies desire the legal authority to use these systems to actively search for criminal activity, a move which is opposed by many privacy and civil rights organizations. Faced with these issues, we must make a choice: how muchShow MoreRelatedHow Does Energy Affect Our Safety Through Our National Security?1493 Words   |  6 Pagesintrigued by is that energy plays a big part in our national security. My big question is: How does energy affect our safety through our national security? As our Nation’s previous President, George W. Bush, stated in 2002, â€Å"Defending our Nation against its enemies is the first and fundamental commitment of the Federal Government,† (4). National security is a concept that deals with the federal government protecting its citizens from a national crisis. A crisis that might occur in the U.S could beRead MoreMozambique Is A Poor Country Essay1599 Words   |  7 Pagesof 25, 303, 113 it suffers the risk of food insecurity. Food security is when all people at all times have physical and economic access to sufficient, safe and nutritious food, that meets dietary requirements for a healthy lifestyle. Mozambique has a ‘high level of food insecurity, like many other countries in Africa, putting individuals, families and communities at risk. Some major factors in Mozambique that affect its food security are poor agriculture, the occurrence of natural disasters, andRead MoreWhat should a person care about more, the nati on or the individual? If an individual wants privacy1700 Words   |  7 PagesWhat should a person care about more, the nation or the individual? If an individual wants privacy for their personal life instead of national security, that is providing yourself with less protection. It is said that privacy is one of the cherished freedoms in our democracy. Everyone wants privacy in their life, but privacy can only go so far without having protection. National security is what keeps the United States safe. National security is the building blocks of a country, because withoutRead MoreBest Atlanta Security Home Case Study772 Words   |  4 Pages How to Choose the Best Atlanta Security Company for Your Home Needs Student’s Name Institution Affiliation How to Choose the Best Atlanta Security Company for Your Home Needs Your home is a vital factor in shaping your daily self-esteem, the choices you make, and your overall outlook towards life. To lead a meaningful life, it is therefore important that you make your home as comfortable as it can be. One of the ways through which you can ensure your home is the most comfortableRead MoreDoes Everything Have A Price?947 Words   |  4 PagesMaryEllen Ellis September 11th, 2014 Essay 1 Does Everything Have a Price? The issue of morality of the markets in the United States is one that is studied extensively. Economists are tasked with the burden of explaining why people buy what they buy and how price can be related to individuals. The old saying â€Å"money can’t buy everything† is slowly becoming obsolete in a society where the right price can persuade one to sell. This notion of changing times does not only correspond to tangible goodsRead MoreHow Hunger Can Be Reduced in the United States Essay1376 Words   |  6 Pagesaccess to food and aid. There are national aid programs like SNAP, UN World Food Programme, and Feeding America, trying to reduce hunger by providing access to food, resources, and the means to keep up those efforts. Teaching people that having sustainable development is better than just relying on aid, is also very important. A meeting of the UN Economic and Social Council noted that they need strong policies and contributions that will help to improve food security and nutrition. They want to focusRead MorePolitical Arguments and Rationale Behind Trade Intervention1319 Words   |  6 Pages The following essay aims at highlighting and analyzing the main political arguments for trade intervention and the rationale behind this. Firstly, what should be noted here is that international trade has been providing different benefits for firms as they may expand in different new markets and raise productivity by adopting different approaches. Given that nowadays marketplace is more dynamic and characterized by an interdependent economy, the volume of internationalRead MoreEncouraging Economic Growth with the Fair Tax Act1728 Words   |  7 Pageslooming threat of a â€Å"double dip† recession have left most Americans bewildered. The issues are complex. The way ahead is unclear and fraught with danger. No one in seems to be quite sure what to do. Politics bicker over ideological talking points while nine percent of their constituents can’t find a job. The price of food, housing, and healthcare rise but wages remain stagnant. The housing market continues to flounder while interest rates hover near zero. While the debate about over the nation’s debtRead MoreMass Surveillance Is Not A Justified M ethod Of Governmental Intelligence Gathering1664 Words   |  7 Pagesand since National Security is mostly a national priority for most countries, therefore mass surveillance is a justified method of governmental intelligence. --Second, there has been proof that mass surveillance helps deter terrorist acts in one’s country. One example of this is in the US, the NSA, or the National Security Agency, helped deter 50 terrorist acts in the US. This helped save many lives. According to the Washington Post, the NSA’s head even stated that the National Security Agency’sRead MoreThe Tour Of Federal Reserve Houston Branch1510 Words   |  7 PagesFed’s function. As the textbook mentioned, The Federal Reserve System is the central bank of the United States and is responsible for setting monetary policy and regulating the banking system. [1] So the Fed has play extremely important role in the national economic. Many countries has their own central bank, such as England established their central bank in 1694, japan established bank of Japan in 1882. The function of central bank is supervising and regulating the bank system. And central bank is

Globalisation ; Video games Free Essays

I am sitting in a small coffee shop on Nanjing Road in the heart of Shanghai’s central business district as I write this post. As I look around me the energy of this metropolis is palpable. There is a sense of optimism and a can-do attitude that is remarkably similar to what I experience in every vibrant economy worldwide. We will write a custom essay sample on Globalisation ; Video games or any similar topic only for you Order Now There is another common thread. Gaming is pervasive. Wherever I look, whether in the coffee shop or in the subway or bus station, people are enjoying video games and immersed in their phone, tablet, or laptop. Last week, I expounded on the first of three secular orces that I believe are changing the videogame industry and today seems more relevant than ever to discuss the second one: globalization. The global software market for video games was approximately $52 billion in 2012. In Just the last 8 years, the emerging markets have gone from 12% to 47% of the market size and are growing at a compounded annual rate of nearly 30%. While the growth is broad based, countries like China, Brazil and Russia are on a tear, growing upwards of 100% in categories like Android and iOS. In most of these markets, consoles are a very small art of gaming today, though that is also starting to change as even countries like China are re-evaluating long held policies on allowing consoles. As I look at technological and game play trends, it is my strong belief that the market for gaming is going to sustain this growth for many years to come and in most cases even accelerate. However, with globalization comes a very different set of technical challenges. Companies can’t simply replicate their success in western markets with a â€Å"rinse and repeat† of existing strategies for new geographies. Companies that simply ranslate their products verbatim and release it into new markets will fail. To succeed, you have to think global but act local. What does this mean in the context of videogames? Each country is different in its gaming patterns, consumer behavior, infrastructure, commercial norms and local regulations. Different aspects of the game have to be tailored for local playing conditions as though the game was built from the ground up for that market. A few examples: New game content that has local relevance and appeal Architectural changes that cater to local infrastructure, such as accounting for expected network latencies and packet losses. Introduction of different business models such as free-to-play Respect for local commercial norms, such as Konbini in Japan or Boleto Bancario in Brazil Expansion of the backend platform to support local offers, promotions and pricing changes Even though videogames are prevalent around the world today, there are cultural nuances that are extremely important to react to when it comes to delivering digital entertainment and services. It’s not Just about marketing products differently (which is also very important) but the technology backbone that goes into supporting these titles also needs to adjust for he country or region you’re in. Everything from payment systems, gameplay mechanics and monetization strategies could be different. One such example is Plants vs. Zombies, a spectacular tower defense game from PopCap that has a massive consumer base in North America. It has had remarkable success in China with its Great Wall edition which was released on mobile in China with local content, consumer data plans (26 and 36) and local network topology. Another example is FIFA Online 3 which was recently released in Korea and is based on the game mechanics of the popular FIFA 13 console game but tailored for the local market. It has already broken records with 2. 4 million players in Just the first four weeks since launch. It’s a format that works better for that market and gives us the opportunity to deliver one of our core franchises to a new audience. Global connectivity has expanded the opportunities for our industry while also completely changing the demands on our technology infrastructure. I have to be thinking global with every decision I make. My next post I’ll address what I see as the final secular force – social connectivity. In the meantime, I’d love to hear how going global in business impacts your day-to-day. How to cite Globalisation ; Video games, Papers

The Great Gatsby and Citizen Kane Essay Example For Students

The Great Gatsby and Citizen Kane Essay Americans dream of a successful marriage, family, successful job, and own a Victorian-style home with a white picket fence and an oak tree with a swing tire in the front yard. The accessories add to the package according to the individuality of the American Dream. And, perhaps along with the melting pot includes the entangled extremes of each Americans dream; the degree of the Dream is now ambiguous in terms of boundaries. Perhaps the American Dream varies for the individual as the individual varies. Charles Foster Kane possessed everything the materialistic man could hope for. Kane had more money than he could count, power, a successful job, women at the crook of his arm, and expensive possessions some men would go to the extremes to have. Yet, Charles constantly had a vast void within him. The most important element Kane lacked was the single thing he couldnt have; that

Frankenstein Essays (626 words) - Frankenstein,

Frankenstein Frankenstein, by Mary Shelley is a complex novel that was written during the age of Romanticism. It contains many typical themes of a common Romantic novel such as dark laboratories, the moon, and a monster; however, Frankenstein is anything but a common novel. Many lessons are embedded into this novel, including how society acts towards the different. The monster fell victim to the system commonly used to characterize a person by only his or her outer appearance. Whether people like it or not, society always summarizes a person's characteristics by his or her physical appearance. Society has set an unbreakable code individuals must follow to be accepted. Those who don't follow the "standard" are hated by the crowd and banned for the reason of being different. When the monster ventured into a town"...[monster] had hardly placed [his] foot within the door ...children shrieked, and ...women fainted" (101). From that moment on he realized that people did not like his appearance and hated him because of it. If villagers didn't run away at the sight of him, then they might have even enjoyed his personality. The monster tried to accomplish this when he encountered the De Lacey family. The monster hoped to gain friendship from the old man and eventually his children. He knew that it could have been possible because the old man was blind, he could not see the monster's repulsive characteristics. But fate was against him and the "wretched" had barely conversed with the old man before his children returned from their journey and saw a monstrous creature at the foot of their father attempting to do harm to the helpless elder. "Felix darted forward, and with supernatural force tore [the creature] from his father..." (129). Felix's action caused great inner pain to the monster. He knew that his dream of living with them "happily ever after" would not happen. After that bitter moment the monster believed that "...the human senses are insurmountable barriers to our union [with the monster]" (138) and with the De Lacey encounter still fresh in his mind along with his first encounter of humans, he declared war on the human race. The wicked being's source of hatred toward humans originates from his first experiences with humans. In a way the monster started out with a child-like innocence that was eventually shattered by being constantly rejected by society time after time. His first encounter with humans was when he opened his yellow eyes for the first time and witnessed Victor Frankenstein, his creator, "...rush out of the [laboratory]..." (56). Would this have had happened if society did not consider physical appearance to be important? No. If physical appearance were not important then the creature would have had a chance of being accepted into the community with love and care. But society does believe that physical appearance is important and it does influence the way people act towards each other. Frankenstein should have made him less offending if even he, the creator, could not stand his disgusting appearance. There was a moment however when Frankenstein "...was moved..." (139) by the creature. He "...felt what the duties of a creator..." (97) were and decided that he had to make another creature, a companion for the original. But haunting images of his creation (from the monster's first moment of life) gave him an instinctive feeling that the monster would do menacing acts with his companion, wreaking twice the havoc! Reoccurring images of painful events originating from a first encounter could fill a person with hate and destruction. We as a society are the ones responsible for the transformation of the once child-like creature into the monster we all know. The public needs to know that our society has flaws and they must be removed before our primal instincts continue to isolate and hurt the people who are different. With such a large amount of technology among us, some people may wonder why such an advanced civilization still clings on to such primitive ways of categorizing people.

What Is the Endoplasmic Reticulum What Does It Do

What Is the Endoplasmic Reticulum What Does It Do SAT / ACT Prep Online Guides and Tips If you’re getting ready for the AP Biology exam, then you’re probably spending quite a bit of time studying cell structure. But keeping all the structures straight and understanding each one’s function can be confusing! That’s why we’re breaking down cell structures for you, starting with the endoplasmic reticulum, or ER. In this article, we’ll teach you everything you need to know about the endoplasmic reticulum, including how it functions in a cell. We’ll even break down the differences between the rough endoplasmic reticulum and the smooth endoplasmic reticulum! Ready? Then let’s get started! A Quick Introduction to Cell Structure The endoplasmic reticulum is an essential part of a cell. In your biology class, you probably learned that cells are the building blocks of all life...including humans! Obviously, that makes cells super important, which is why it’s also important to understand how they function. Because plants and animals are complex creatures, the structure of a cell is complex, too. Each cell is made up of many individual parts, each of which has a job within the cell itself! Some help keep everything in one place (like the cell membrane), some produce energy to power the cell (the mitochondria), and there are even parts that help keep the cell clean (lysosomes)! These different structures found within cells are called organelles. The endoplasmic reticulum is an organelle that can be found in both eukaryotic (animal) and prokaryotic (plant) cells. Just keep in mind that not all cells have endoplasmic reticulum! For example, red blood cells don’t have endoplasmic reticuli, even though they’re an important part of animal biology! Endoplasmic Reticulum Definition The endoplasmic reticulum is defined as an organelle that is made up of a series of phospholipid membranes. In fact, the membranes that make up the endoplasmic reticulum can account for half of a cell’s total membrane structure in animal cells! These membranes are called cisternae, are shaped like tubes or sacs, and are continuous with the outer membrane of the cell’s nucleus. That’s a fancy way of saying that the endoplasmic reticulum is attached to the nucleus itself. Endoplasmic Reticulum Function Now let’s talk a little bit more about how an endoplasmic reticulum functions. In general, the endoplasmic reticulum helps with the synthesis, folding, modification, and transport of proteins and lipids. The endoplasmic reticulum does this through ribosomes that are attached to its membrane walls. (We’ll talk more about how this works a little later). The endoplasmic reticulum also stores calcium and releases it when the cell needs it. In fact, many of the proteins and lipids made by the endoplasmic reticulum are used by other organelles in the cell. One of the best ways to understand- and remember!- what the endoplasmic reticulum does is to think of it like a factory. In a manufacturing plant, people take raw materials and make it into something new and usable, which they then ship to other stores, manufacturers, and suppliers around the world. Just like a real-world factory, the endoplasmic reticulum builds the â€Å"products† a cell needs to function, then â€Å"ships† them to where they need to go, when they need to go there. CFCF/WikimediaCommons Endoplasmic Reticulum Appearance So what does the endoplasmic reticulum look like, exactly? Well, do you remember the mazes that you could find in coloring books when you were a kid? The endoplasmic reticulum looks a lot like that! The cisternae stretch out and away from the cell nucleus in a series of folds and tubes, and they extend throughout the cell almost like a highway system. So when you’re looking at a cell diagram, look for the maze-like structure that’s attached to the cell nucleus. That’s the endoplasmic reticulum! You might notice that cell diagrams often picture some areas of the endoplasmic reticulum with bumps, while other sections look smooth. That’s because endoplasmic reticulum is actually comprised of two pieces: the rough endoplasmic reticulum and the smooth endoplasmic reticulum. Knowing how these different areas work is important to understanding the function of the endoplasmic reticulum as a whole. CFCF/Wikimedia Commons Rough Endoplasmic Reticulum The rough endoplasmic reticulum, or RER, gets its name from the ribosomes embedded in its surface...which make it look rough! The rough endoplasmic reticulum is situated closest to the nucleus- in fact, it’s attached to the nuclear envelope- so that molecules can move directly between the membranes. The ribosomes that are attached to the walls of the rough endoplasmic reticulum function just like free ribosomes would. That means that they synthesize proteins, which provide the energy needed for a cell to operate. The process of creating proteins is called translation. One the ribosomes have synthesized a protein, they are â€Å"labeled† with a specific final destination. Some proteins are sent to the Golgi apparatus, while others are secreted into the cell exterior or kept within the membrane of the rough endoplasmic reticulum itself. There are certain proteins that are sent into the space within the rough endoplasmic reticulum. This space, which is also called the lumen, is where certain proteins are folded, modified, and assembled. Some of these proteins will have sugar groups added to them to form glycoproteins. Likewise, some of these new proteins will be transported out of the endoplasmic reticulum, while others will stay inside the endoplasmic reticulum to perform functions there. The lumen is also where the endoplasmic reticulum does its â€Å"quality control.† When misfolded or otherwise incorrect proteins accumulate in the lumen, the unfolded protein response (or UPR) is triggered. This tells the cell to reduce the amount of protein its producing while enhancing the endoplasmic reticulum’s protein-folding ability. If the problem doesn’t correct itself, it triggers apoptosis, or programmed cell death. One super cool note: the ribosomes of the rough endoplasmic reticulum aren’t permanently attached to the membrane itself. That means that new ribosomes can detach and attach depending on the proteins the cell needs! CFCF/Wikimedia Commons Smooth Endoplasmic Reticulum Unlike the rough endoplasmic reticulum, the smooth endoplasmic reticulum doesn’t have any ribosomes attached to it. That makes it look smooth- which is how it gets its name! The smooth endoplasmic reticulum’s function is almost exclusively to make lipids, like phospholipids and cholesterol. How these lipids are used depends on the cell type. Lipids can be used to create new cell membranes, create hormones, and store energy. The smooth endoplasmic reticulum also helps detoxify the cell by converting toxic organic chemicals into safer, water soluble products. Fun fact: when there are lots of toxins present, the smooth endoplasmic reticulum can double its surface area to help clear them out. It will then return to normal size after the toxins have been removed. Liver cells have large amounts of smooth endoplasmic reticulum for this very purpose! Finally, there’s a type of specialized smooth endoplasmic reticulum called the sarcoplasmic reticulum. The sarcoplasmic reticulum is found in muscle cells and is used to store calcium ions that muscles need to function. When muscles experience sustained activity, the sarcoplasmic reticulum can release the stored calcium ions to help the muscles function. Additional Resources If you’ve read through this guide and still would like to know more about how the endoplasmic reticulum works, here are a few other resources that you can check out. Khan Academy Khan Academy has tons of free resources on all sorts of topics including cell structure. Their video on the endoplasmic reticulum is really helpful, and they have articles about it on their website, too. The British Society for Cell Biology The British Society for Cell Biology is a British non-profit organization dedicated to advancing cell biology research, which includes sharing knowledge and information. One of the ways they do this is through educational material, which they share on their website. Their softCell e-Learning portal has tons of good information about all the organelles of a cell, including the endoplasmic reticulum. CrashCourse Who said studying has to be boring? The CrashCourse channel on YouTube- hosted by none other than John and Hank Green of VlogBrothers fame- is all about creating fun and informational educational content. Hank’s series on animal cells is a great resource, and the fourth video in the series (Eukaryopolis!) gives you an overview of the endoplasmic reticulum. What’s Next? Need to brush up on more than just the endoplasmic reticulum before tackling the AP Biology exam? Grabbing a workbook or textbook might be your best bet. Here’s a curated list of the best AP Biology books to help you study harder and smarter. If you’re feeling overwhelmed by the AP Biology exam, you’re not alone. There are lots of students who find this test tricky! That’s why we’ve put together a complete AP Biology review guide. It breaks down all of the topics that might appear on the exam, so you can figure out exactly what you need to study. (It also includes some great study tips, too!) The best way to figure out if you’re prepared for the AP Biology test is to take a practice exam. Here’s a list of every AP Biology practice test available. And the best news? They’re free!

Aceto 10K Essay Example | Topics and Well Written Essays - 250 words

Aceto 10K - Essay Example The companies are primarily located in the United States, Europe, and Asia-Pacific regions. The customers range from small enterprises to large firms (Aceto, 2014). The financial analysis was from the fiscal year that ended on June 30, 2014. The Human Health segment had net sales of $160,217, which represented a 23.6% increase from the previous year. The Pharmaceutical Ingredients segment had a net sale of $176,425, a 4.6% decrease from the prior year. The Performance Chemicals segment had net sales of $173,537, a decrease of 6.3% from the previous year. The Pharmaceutical Ingredients section seems to be the largest contributor to the net income of the company followed by the Performance Chemicals segment. Ironically, the two significant contributors dropped yet the overall net sales of the company increased by 2.1% to $510,179. It seems the vast rise in the Health Segment were enough to buffer the shortcomings in the other segments (Aceto, 2014). The company faces a lot of risks that could affect its financial performance in the future. Being a business that first sources before distributing products, it faces a significant challenge in case some of its suppliers close down or decide to sell their products. Also, low-quality products from the suppliers can affect the company’s image if the goods manage to reach the consumers. Another risk factor that could face the company is the increasingly invention of new technology in the health and pharmaceutical fields. For example, genetic engineering and gene-based medications could pose a big threat to the products of the

The Jubilee Debt Campaign Essay Example | Topics and Well Written Essays - 1500 words

The Jubilee Debt Campaign - Essay Example This paper suggests that while reckless or self-interested lending by the rich world is indeed a factor, one significant aspect that must be neglected is the weakness of the developing countries with regard to its democratic institutions and regulatory mechanisms. In many, if not most, instances, it is the leaders of the developing countries themselves that subvert the development trajectory of the respective nations and compromise the well-being of their citizens. Domestic policy has played a big, if not key role, in the debt crisis of the third world. Leftwich suggests that official Western aid policy and development thinking is dominated by a new orthodoxy that good governance and democracy is not only desirable but also necessary. In many aid and loan agreements, however, precisely what is being taken advantage of is the dismal lack of democratic structures and glaring issues of governance. The point is that it is impossible to work out an economic recovery program while followin g the debt-repayment schedule of the creditors. Despite two decades of death relief efforts, the problem still remains. Hardships are evident, and many mass protests have taken place as a result of these hardships. A very good example of this is when precious government resources are channeled to debt restructuring instead of capital expenditures. The researcher takes a look at the example of Asian countries during the period of 1985 to 1995. Contrary to doctrinaire free-market economics, institutional economists argue that government financial resources devoted to building physical or social infrastructure or shoring up domestic demand â€Å"crowd in† rather than â€Å"crowd out† private investment, including foreign investment. For instance, one key study of a panel of developing economies from1980 to 1997 found that public investment, complemented private investment, and that, on average, a 10-percent increase in public investment was associated with a 2-percent inc rease in private investment.

Writing for Different Cultures and Audiences Annotated Bibliography

Writing for Different Cultures and Audiences - Annotated Bibliography Example For this kind of research, it plays the role of acquainting the research with the basic information on Australian culture and how culture has changed from time to time. Clancy talks about the evolution of Australia from the time when it was only inhabited by the Aboriginals to the moment when immigrants began arriving and settling in the Island. The book traces the arrival of Europeans in the 18th century and also examines the people of Anglo=Irish origin who migrated to Australia. It sort of talks about the Australian identity and highlights the popularity of Christianity and how globalization has led to urbanization of the bush that Australia was. Apart from giving a chronological account of the metamorphosis of Australia, the book also covers tourism, sports and its significance, national barbeque and the influence that Indians and Europeans have on the country. The book is important for the research because it covers the fundamental issues of Australian culture and it evolution. It, however, fails to properly cover the Aboriginals who form the basis of Australian culture. It, however, still forms the basis of the research and will be used toget her with other books to get a conclusive research on Australian culture. In this book, Colson covers the culture of the Aboriginals. The Aboriginals are the indigenous people of Australia, who have complained about the atrocity committed against them by the immigrants who moved to Australia. Their culture was affected by the influx of people into Australia. However, they form a significant basis of Australian cultural history. Colson chronicles the culture of the Aboriginals their ceremonies, art and how their culture has influenced Australia. It also covers the family structure and society of other indigenous Australian cultures. It is a short book but has important information on the culture of Aboriginals. Since it is

Contract Law Advice Style Answer

Contract Law Advice Style Answer Arron and Tracy have entered into three different types of contracts. Firstly, there is a contract for sale of goods between Tracy and HAL[1] for the purchase of the coffee machine. Secondly, there is a contract for service among Arron and Matthew for the decoration of the hallway. Then, there is a contract for sale of description between the Arron and the dog-seller for the purchase of dog. The contracts appeared to be consumer contracts, since they satisfied the requirements established under the Unfair Contract Terms Act[2]. Section 12[3] states that a person dealing under a consumer contract is when one party performed in the course of a business and not the other party. Moreover, the goods in consideration must be ‘of a type ordinarily supplied for private use’.[4] Section 2(1) of the Sale of Goods Act[5]states that for a consumer contract to exist there must be ‘a money consideration’. In application, it is clear that Arron and Tracy are consumers, whi ch are not acting in the course of the business, but we cannot say the same for the other parties. In the cases of Stevenson[6] and R B Customs[7], the term ‘in the course of a business’[8] is wisely explained, it is clear that the other parties who contracted with them are included. THE LUXURY COFFEE MACHINE* The purchase of the luxury coffee falls under the implied terms of s. 14 SGA[9], which says that the goods supplied must be of â€Å"satisfactory quality†. Under S.14 (2A)[10], the test is that of ‘a reasonable person’ would regard as satisfactory. Thus, when the coffee machine was bought no one will expect it to burn hands and to be unsafe (considering the criteria in s.14 (2B)[11] of the act. Here, it includes safety as per s.14 (2B) (d)[12]. Indeed, the General Product Safety Regulations 2005[13] has included electrical equipment as having a requirement to be safe, by being properly insulted. However, this is not the case when the coffee machine becomes too hot which is clearly unsafe. It is clear though that s.14[14] is in breached since the product supplied burnt hands by becoming too hot. Consequently, Tracy can return or ask for a refund of the price ( £150) and damages. Nevertheless, in order to entitle to this, it must be established that Tracy has not â€Å"accepted† the product. Otherwise, if it has taken place the remedy is damages only which will be under s.11 (4).[15] Furthermore, s.35 (4)[16] says that acceptance occurred when a buyer retain the goods for a certain period of time without intimating to the seller that she rejected it. The question of time had an extensive discussion about how long and what actually is a reasonable time. It was first established under the case of Bernstein[17], under which there was a maximum of 3 weeks. However, it was later replaced by Clegg[18] the actual law which provides a period of 7 months. In application, Tracy is visibly within the time limit, as she rejected the offer when she returns the coffee machine back to HAL. Furthermore, since Tracy paid the coffee machine with her credit card, she may have additional rights under the Consumer Credit Act 1974[19]. In fact, she enters into a consumer credit agreement which is defined under s.8 (1)[20] as an agreement between an individual and the creditor by which the creditor provides the debtor with credit of any amount. In application, this is the case when Tracy paid the product with her credit card define as ‘financial accommodation’ under s.9[21]. It was a regulated consumer credit agreement under s.8 (3)[22] as it was not an exempt agreement. It also constitutes a restricted use, according to the situation in the problem as per s.11 (b)[23] and a running account as per s.10 (1) (a)[24].Consequently, as the product is purchase with a credit card, there is a D-C-S agreement under s.12 (b)[25]; debtor: Tracy, creditor: Barclaycard and the supplier: HAL .In such a case, where there is a faulty product, which is the case Tracy has a ‘ like claim’ against the credit card company under s.75[26]. HAL and the credit card company are ‘jointly and severally liable’ for the aforementioned breach of S.14 SGA[27]. Therefore, Tracy has a claim against both HAL and Barclaycard. Indeed, if the claim against the shop is unsuccessful, then she is entitled to use s.75 as a shield. Furthermore, even if Vicky is not a party to the contract she might have a claim against HAL since the privity of contract was overcome by the narrow rule of Lord Atkin in the case of Donoghue v Stevenson.[28] Despite the fact, that she could claim under negligence it will be best to sue under Consumer Protection Act[29] since there is a strict liability. Vicky might claim a civil liability under Part I of CPA[30] which covered damage or personal injury caused by the faulty products, when her arm is burn. The coffee machine is defective as per s.3, since no one will generally expect the coffee machine to become too hot and unsafe. Therefore, she will be able to sue for damages. Moreover, there may be a potential criminal liability under Part II of CPA which covered damage caused by unsafe product. Certain goods need to satisfy the safety requirement under s.11 (1)[31]. Therefore, a failure to meet the safety regulations is a breach under s.12[32], but unless the product supply is unsafe which here is visibly the case. Additionally, HAL will try to rely on the exclusion clause. In order to be effective, the clause needs to satisfy certain legal rules. When Tracy went to return the coffee machine, she was pointed a notice which states â€Å"Sale items cannot be returned†. Applying the case of Olley[33], which established that for a notice to be incorporated it need to be before or at the time of the contract. Since, Tracy could not remember having seen the notice before; it is very likely that there clause was not incorporated. Even if the clause was valid, it will not make a difference because s6 (1) UCTA states that liability in consumer contract for breach of s.14[34] cannot be excluded. MATTHEW, THE DECORATOR* The contract between Arron and Matthew is governed by the Supply of Goods and Services 1982[35] since the substance of the contract is based on services. The SGSA[36] consist of two parts; Part 1 consists of the quality of goods supplied under the contract for the services and Part 2 is about the supply of services Under Part 1, there is an implied term that goods supplied on the part of the act to be of satisfactory quality and fit for purpose under s.4. This section mirror the provisions contain within s.14 (2A) and (2B) of SGA[37]. It should be noted that there is no provision equivalent to s11 (4) and s.35. Therefore, generally when Arron buys the wallpaper guaranteed to last 10 years he will expect the product to be of satisfactory quality and to durable as per the other relevant circumstances under s.4 (2A)[38] which mirror the provision of s.14 (2B) (e)[39]. But this was not the case when the wallpaper falls off the wall after six weeks. Unlike Part 1, which implied term concern the goods, Part 2 implies following terms concerning the supply of services. Contrarily, to Part 1 it is possible to exclude liability, under s.11 UCTA for breach under the service part of the contract. A contract for supply of services is defined under s12[40] as â€Å"a contract under which a person (the supplier) agrees to carry out a service.† Under Part 2 there is an implied term under s.13[41] that the services provided by the supplier will be carried out within a reasonable care and skill. It should be noted that s.13 implies generally accepted to be innominate term as in Hong Kong Fir[42] by depriving the innocent party of the whole benefit of the contract. This is clearly the case here when ‘the wallpaper fall off.’ Applying Nettleship v Weston[43], there is no defence even if the person claims to have to their incompetent best. Under, Bolam[44] if the skilled conforms within the standard required is of a reasonable competent member of the relevant trade, he will not be liable due to others different views. As established in Philips[45] , the services must be carried out with such a care as within the capacity of his degree of experience which he claimed to have .He must have a level of skill of such specialist which he holds to Arron as in Grieves.[46]Therefore, when Arron employed Matthew, he expected t he work to be done with a reasonable care and skill and not be fall off within six weeks. Clearly s.4[47] and s.13[48] are in breached. Consequently, Arron will be able to ask for damages since rejection will be impossible. The claim for recovery of damages is for the poor service or poor quality of materials used in the contract term, it includes actual damages for the failure of wallpaper which has not be achieved it result by holding on the wall and consequential damages for the money which Arron will have to expense to repair the breach. In order to entitle to this, Arron must have taken reasonable steps to mitigate his loss suffered, which require acceptance of offer from the defendant to rectify the matter, like under the case of Payzu.[49]It is clear that mitigation of loss had occurred when Arron suggested to Matthew that he should properly do the work again. Hence, Arron will be able to recover for the damages since he gives the opportunity to Matthew to redo the work properly. Additionally, Matthew tried to rely on the exclusion clause, when Arron tells him that he should properly ‘redo’ the work. An exclusion clause is used by a party in order to restrict or limit liability in an event of a breach of contract or any other specified circumstances. But, for it to be effective three legal conditions need to be consider; the common law, the UCTA and the Unfair Terms in Consumer Contract Regulations 1999[50]. Under the common law, the clause must be incorporated and constructed. According to the scenario, the clause was incorporated by an express agreement since there is not enough information to state that a contract was signed between the parties. Therefore, it is very likely that the clause was incorporated. As for the construction of the clause, it must be established that in interpretation of the contract the clause cover the breach which has occurred. In application, the clause is constructed in a plain language but it does not cover the breach. Hereafter, the clause might not be hold as constructive by court. In addition, the statutory controls need to be considered. The legislation for exclusion clauses is governed by the provision under UCTA and UTCCR. The UCTA was created in order to protect the weaker party, for example the consumer. Under s.11(1), the reasonableness test need to be consider, under which the term must be fair and reasonable by including all circumstances ‘[†¦]which were or ought reasonable to have be known[†¦]’[51]. In the problem question, it is clear that the terms are not fair and reasonable since Matthew restricted the term of the contract for his own benefit and not for Arron (the consumer). He excluded all extra cost and loss arising out of the decorating services. The UTCCR will not be applicable due to lack of information about the presence of a contractual term or a standard form. Even if the exclusion clause is valid s.7[52]states that liability for consumer contracts for breach of s4 and s13 cannot be excluded. However, this liability can be excluded if satisfies the requirement of the reasonableness which is visibly not the case here. Arron might have a criminal liability against the producer for the commercial practices of the wallpaper through television advertising. The liability will be under Schedule 1 of the Consumer Protection from Unfair Trading Regulations 2008[53]which replaced some consumer protection legislation; like CPA Part 3 or even the TDA[54]. He can claim liability for misleading actions under Regulation 5. It occurs when a misleading information lead the average consumer to make a decisive reason to enter the contract. In application, it is clear that it is the 10 years old guarantee, which encourages Arron to buy this specific paper. This commercial practice clearly distinguished the product from the competitor (para.3 (a) of reg.5), was obviously a main characteristic of the product (para.4 (b) of reg.5) which makes him make a decisive decision in buying this product rather than the others. PUPPIES* The buying of pedigree dog is governed by the SGA. However, the effect of the statement must first be drawn, by stating whether it is a puff, a representation, a term or a sale by description. The difference between these statements will be established. A puff is a ‘mere boast or unsubstantiated claims’ which are used by advertisers for their products and services .An example is the case of Carlill[55]. Representations or contractual term are statements made in course of negotiation for a contract. While, a term of contract define as outcome to pre-contractual negotiation between parties can be distinct in two types; implied and express. It could also be a sale by description under s.13 which implied term is that the goods must ‘correspond’ to the words used for the description of the goods. In application, it is clear that is a sale by description where the adverts states that the dogs are ‘pedigree dogs’ with ‘friendly temperature’. S.13 is breached as the description is inaccurate and that the dogs are crossbreeds, aggressive and snappy. There is a strict liability under s.13 and the remedy, will allow Arron to reject the good and receive damages. Next, Arron has paid the pedigree dog with his credit card; he may have a claim under CCA. Under the CCA, a D-C-S agreement is established, under s12 (b) consisting of the debtor; Arron, the creditor; the credit card company (Barclaycard) and the supplier (the dog-seller). It may be that has a claim under s.75 where the creditor is jointly and severally liable with the supplier for the supplier misrepresentation and for breach of s.13 SGA. If, the claim is not successful under SGA against the supplier, Arron will be to use s.75 as a shield. Criminal liability is regulated by the regulation 5[56] for the false information which deceived the consumers. The false statement of the advert may lead to a criminal offence under reg.5 CPUTR which prohibits false information to be applied on goods. S.2 (2) (a), states that goods includes the descriptions and details of animals as per there ‘sex, breed or cross [†¦]’[57].Under s.3 (1)[58] explains the term of â€Å"false to a material degree†. In application, it is clear that the advert the newspaper is a material degree and that there is a breached of Reg 5. 2515 Word Count*(Excluding titles) Bibliography Primary Sources Cases: Bolam v Friern Hospital Management [1957] 1 WLR 582 Bernstein v Pamson Motors [1987] RTR 384 Carlill v The Carbolic Smoke Ball Co Ltd [1893] 1 QB 256 Donoghue v Stevenson [1932] AC 562 Grieves Co Baynham [1975] 1 WLR 109 Hong Kong Fir Shipping Co Ltd v Kawasaki Kisen Kaisha Ltd [1962] EWCA Civ 7 Nettleship v Weston [1971] 2 QB 691 Olley v Marlborough Court Ltd [1949] 1 AII ER 127 Payzu Ltd. V Saunders [1919] 2 KB 581 Philips v William Whitely Ltd [1938] AII ER 566 RB Customs Brokers Ltd v United Dominions Trust Ltd [1988] 1 WLR 321 Stevenson v Rogers [1999] 1 All ER 613 Statutes and statutory instruments: Trade Description Act 1968 Consumer Credit Act 1974 Unfair Contract Terms Act 1977 Sale of Goods Act 1979 Supply of Goods and Services Act 1982 Consumer Protection Act 1987 Unfair Terms in Consumer Contracts Regulation 1999 Consumer Protection from Unfair Trading Regulations 2008 Secondary Sources Books: Nicholas Ryder, Margaret Griffiths, Lachmi Singh, Commercial Law (Principles and Policy), (First published 2012,Cambrige) Michael Furmston and Jason Chuah, Commercial Law,(2th edn, Pearson 2013) Chris Turner, UNLOCKING CONTRACT LAW,(First published 2004,Hodder Stoughton) Chapters in Books: Michael Furmston and Jason Chuah, Chapter 4 ‘Sale of Goods’: 4.8 Defective goods, Commercial Law,(2th edn, Pearson 2013) pg. 192-201 Chris Turner, Chapter 6 ‘The Obligations under a Contract : Term 6.1.2: Types of representation and their consequences, UNLOCKING CONTRACT LAW,(First published 2004,Hodder Stoughton) pg. 111-116 Websites and Blogs: Which? Consumer Right ‘Supply of Goods and Services Act 1982’ (2014) http://www.which.co.uk/consumer-rights/regulation/supply-of-goods-and-services-act-1982>accessed on 19 March 2014 Financial Ombudsman Service , oombudsman news  » issue 31  » credit cards equal liability under section 75 of the Consumer Credit Act 1974 (sep 2003) http://www.financial-ombudsman.org.uk/publications/ombudsman-news/31/creditcards-31.htm> accessed on 25 March 2014 FindLaw UK, ‘Your rights under section 75 of the Consumer Credit Act’ http://www.findlaw.co.uk/law/consumer/consumer_credit/500520.html> accessed on 02 April 2014 BBC one Watchdog, ‘Supply of Services’(2014) http://www.bbc.co.uk/programmes/b006mg74/features/consumer-law-supply-of-services> accessed on 06 April 2014 Out-Law.com, ’Product liability under the Consumer Protection Act’ (last update 2011) http://www.out-law.com/en/topics/commercial/supply-of-goods-and-services/product-liability-under-the-consumer-protection-act/> accessed on 09 April 2014 [1] Home Appliances Ltd [2] Unfair Contract Terms Act 1977; UCTA [3] Unfair Contract Terms Act 1977 [4] Section.12(1)(c) Unfair Contract Terms Act 1977 [5] Sale of Goods Act 1979;SGA [6] Stevenson v Rogers [1999] 1 All ER 613 [7] RB Customs Brokers Ltd v United Dominions Trust Ltd [1988] 1 WLR 321 [8] Section 12 Unfair Contract Terms Act 1977 [9] Section 14 Sale of Goods Act 1979 [10] Section 14 (2A) Sale of Goods Act 1979 [11] Section 14 (2 B) Sale of Goods Act 1979 [12] Section 14 (2B) (d) Sale of Goods [13] General Product Safety Regulations 2005;GPSR [14] Section 14 Sale of Goods Act 1979 [15] Section 11 (4) Sale of Goods Act 1979 [16] Section 35 (4) Sale of Goods Act 1979 [17] Bernstein v Pamson Motors [1987] RTR 384 [18] Clegg v Anderson [2003] EWCA Civ 1002 [19] Consumer Credit Act 1974;CCA [20] Section 8 (1) Consumer Credit Act 1974 [21] Section 9 Consumer Credit Act 1974 [22] Section 8 (3) Consumer Credit Act 1974 [23] Section 11 (b) Consumer Credit Act 1974 [24] Section 10 (1)(a) Consumer Credit Act 1974 [25] Section 12 (b) Consumer Credit Act 1974 [26] Section 75 Consumer Credit Act 1974 [27] Section 14 Sale of Goods Act 1979 [28] Donoghue v Stevenson [1932] AC 562 [29] Consumer Protection Act 1987:CPA [30] Consumer Protection Act 1987 [31] Section 11 (1) Consumer Protection Act 1987 [32] Section 12 Consumer Protection Act 1987 [33] Olley v Marlborough Court Ltd (1949) 1 ALL ER 127 [34] Section 14 Sale of Goods Act 1979 [35] Supply of goods and Services Act 1982; SGSA [36] Supply of Goods and Services Act 1982 [37] Sale of Goods Act 1979 [38] Section 4 (2A) Supply of Goods and Services Act 1982 [39] Section 14(2B)(e) Sale of Goods Act 1979 [40] Section 12 Supply of Goods and Services Act 1982 [41] Section 13 Supply of Goods and Services Act 1982 [42] Hong Kong Fir Shipping Co Ltd v Kawasaki Kisen Kaisha Ltd [1962] EWCA Civ 7 [43] Nettleship v Weston [1962] 2 QB 691 [44] Bolam Fried Hospital Management [1957] 1 WLR 582 [45] Philips v William Whitely Ltd [1938] 1 ALL ER 566 [46] Grieves Co v Baynham [1975] QB 644 [47] Section 4 Supply of Goods and Services Act 1982 [48] Section 13 Supply of Goods and Services Act 1982 [49] Payzu Ltd v Saunders [1919] 2 KB 581 [50] Unfair Terms in Consumer Contract Regulations 1999; UTCCR [51] S.11(1) of Unfair Contract Terms Act 1977 [52] Section 7 Unfair Contract Terms Act 1977 [53] Consumer Protection from Unfair Trading Regulations 2008; CPUTR [54] TDA:Trade Description Act 1968-largely repealed by CPUTR [55] Carlill v The Carbolic Smoke Ball Co Ltd [1893] 1 QB 256 [56] Regulation 5 of Consumer Protection from Unfair Trading Regulations 2008 [57] Section 2(2)(a) of the Trade description Act 1968 [58] Section 3(1) of the Trade description Act 1968

Jackie Robinson: Breaking the Racial Barriers Essay -- Robinson Histor

Jackie Robinson: Breaking the Racial Barriers   Ã‚  Ã‚  Ã‚  Ã‚  On July 23, 1962, in the charming village of Cooperstown, New York, four new members were inducted into baseball’s Hall of Fame. As they gathered around the wooden platform, the fans reminisced about America’s national pastime. Edd Roush and Bill McKechnie, sixty-eight and seventy-four years old respectively, were two of the inductees that day (Robinson 142). They were old-timers chosen by the veterans’ committee. Bob Feller and Jackie Robinson, both forty-two, were youngsters by comparison. According to the rules of the Hall of Fame, a player must be retired for five years before he can be considered for induction. Both Feller and Robinson were elected in the first year they were eligible (141).   Ã‚  Ã‚  Ã‚  Ã‚  As Robinson received his plaque to take his place among the greats in the Hall of Fame, he said, â€Å"I’ve been riding on cloud number nine since the election, and I don’t think I’ll ever come down. Today everything is completeâ€Å" (Robinson 142). After the induction ceremony, an exhibition game between the Milwaukee Braves and the New York Yankees was to take place at Doubleday Field, where the sport had its beginnings. A sudden thunderstorm delayed the game, and after an hours wait it was cancelled. At this same time, picketers in the streets of Harlem were carrying signs saying, â€Å"Jackie, we love you as a ballplayer, but not as a spokesman for the Negro raceâ€Å" (143).   Ã‚  Ã‚  Ã‚  Ã‚  Just two days earlier at a banquet in the Waldorf Astoria Hotel in New York City, many people had paid $25 a plate to show their admiration for Jackie as both a ballplayer and a representative of the Negro race as well. Some of the most distinguished figures in the nation were present this day and their praise was loud and long (Mann 187). Jackie had accepted without hesitation a challenge to break a prevailing color barrier in the national sport of America with complete knowledge of how much depended on him. Few men had ever faced such competitive odds when becoming a player in organized baseball. Despite criticism and opposition, Jack Roosevelt Robinson had truly come a long way from his poor beginnings as the grandson of slaves in Cairo, Georgia, to breaking the racial barriers in major league baseball by becoming its first black athlete and achieving hall of fame status. Jackie Robinson’s childhood was a struggle in family and financ... ...s and coaches can now be found in the dugout and a few black managers on third base. However, the great Dodger would most likely have kept pushing to see more racial diversity in baseball, particularly among the executive ranks. The Hall of Fame second baseman was never satisfied with second best. Works Cited Bontemps, Arna. Famous Negro Athletes. New York: Dodd, Mead and   Ã‚  Ã‚  Ã‚  Ã‚     Ã‚  Ã‚  Ã‚  Ã‚  Company, 1964 Brown, Avonie. â€Å"Jackie Robinson, Dodgers #42.† The Afro-American   Ã‚  Ã‚  Ã‚  Ã‚     Ã‚  Ã‚  Ã‚  Ã‚  Newspaper Company of   Ã‚  Ã‚  Ã‚  Ã‚  Baltimore, Inc., 1997.   Ã‚  Ã‚  Ã‚  Ã‚     Ã‚  Ã‚  Ã‚  Ã‚  http://www.afroam.org/history/Robinson/intro.html Robinson, Jackie. I Never Had It Made. New Jersey: The Ecco Press, 1995. Smith, Robert. Pioneers of Baseball. Boston: Little, Brown, 1978. â€Å"Soul of the Game.† The Sporting News, 2000.   Ã‚  Ã‚  Ã‚  Ã‚     Ã‚  Ã‚  Ã‚  Ã‚  http://www.sportingnews.com/features/jackie/ TIME. Great People of the 20th Century. New York: Time Inc. Home   Ã‚  Ã‚  Ã‚  Ã‚     Ã‚  Ã‚  Ã‚  Ã‚  Entertainment, 1996 Walker, Sam. â€Å"How Blacks View Sports in Post-Robinson Era.†(cover story)   Ã‚  Ã‚  Ã‚  Ã‚     Ã‚  Ã‚  Ã‚  Ã‚  Christian Science Monitor   Ã‚  Ã‚  Ã‚  Ã‚  1997: 1 Young, A.S. â€Å"Doc.† Negros Firsts in Sports. Chicago: Johnson Publishing   Ã‚  Ã‚  Ã‚  Ã‚     Ã‚  Ã‚  Ã‚  Ã‚  Company, Inc., 1963

Hot Cheetos

How flamin’ hot Cheetos affect the body The topic of my research project is â€Å"How Flamin’ Hot Cheetos affect the body†. There are many ways flamin’ hot Cheetos can affect your body. Basically my research explains ways that flamin’ hot Cheetos could possibly affect you, but not necessarily happen. Flamin’ hot Cheetos are categorized as any other junk food, but is said to be very addictive and can cause ulcers and inflammation in your body. Everyone loves flamin’ hot Cheetos right?But have we ever once stopped to wonder how Cheetos affect our body? Because children and teens have taken such a strong liking to the high-caloric snack, nutritionists and other health professionals are concerned about the unhealthy habit. One ounce of Flamin' Hot Cheetos — about 21 pieces — is about 160 calories, including 17 percent of the daily suggested serving for fat and 8 percent of serving for saturated fat. It also contains 250 mg â €” or 10 percent of the daily value — of sodium. That doesn't sound so bad.However, the snack often comes in bags that offer two or more serving sizes of Cheetos, which offer almost no dietary fiber or protein. The â€Å"new bigger size† bag of Flamin' Hot Cheetos contains 3 3/4 oz. , or nearly 680 calories, 44 grams of fat, and 40 percent of days recommended sodium, according to the package nutritional label. Hot Cheetos are very spicy and stain your lips and fingers red. The spice increases stomach acidity, so children get stomach aches, sometimes so terrible they're doubled over in pain.Because the spicy snack contains a lot of red food dye, it can turn the stools of people who eat large amounts of Cheetos red or orange. So even though we might eat some foods with red food dye in them regularly, our stool doesn't usually become discolored unless you eat huge amounts of it. Flamin' Hot Cheetos is one food that people will eat enormous amounts of and will see a ch ange in their stool color. On top of the artificial coloring and flavoring, some experts say the Cheetosare â€Å"hyperpalatable,† meaning they’re highly addictive.Additionally, scientists, researchers, and nutritionists all fear that, because it is a processed food, the â€Å"hyper-palatable† combination of the Flamin' Hot Cheetos' fat, salt, and spiciness could potentially make it hard for people to stop eating the snack. Some research suggests foods high in fat and salt trigger areas in the brain linked to addiction. Our brain is really hardwired to find things like fat and salt really rewarding and now we have foods that have them in such high levels that it can trigger an addictive process.Why do we crave fatty foods you ask? Many people choose fatty foods as comfort foods when bored, stressed or upset. Comfort eaters may reach for familiar fatty foods or foods that remind them of better times. Eating fatty foods may become a distraction from your problems. Fatty food cravings may be largely a matter of habit. People often experience food cravings because they're accustomed to eating certain types of food in certain situations or in response to certain emotional cues.If you have the habit of eating fatty foods, then when you get hungry you'll start to crave fatty foods out of habit. Kids are particularly susceptible because they are still developing, and some researchers are finding craving levels in Cheetos-lovers similar to those of people addicted to drugs. To tell patients to stop eating the snacks is almost like talking to smokers about quitting smoking. The patients really don't want to hear that. Flamin’ Hot Cheetos are being outlawed in some schools because they’re â€Å"highly addictive†.Hot Cheetos are bad because in the long run it can cause gastritis, inflammation of the stomach, it can cause ulcers. Some kids even ten or eleven years old have ulcers in their stomach because of this snack. Flamin' Hot Cheetos have an aura of danger which fuels their wild popularity  with kids. When it comes to addictiveness and poor nutritional quality, Flaming Hot Cheetos is your snack. I’m not saying Flamin’ Hot Cheetos is the worst snack ever, but it definitely isn’t the healthiest. A serving or two is okay every now and again, but don’t eat them every day.They affect your body more than you think. You might not see it now, but you will. I would recommend this snack to others to eat every once in a while, but I don’t think anyone should eat them all the time. The calories and salt in this snack is outrageous. Watch out because it is a delicious and addictive snack. It might make you a victim of its tricky and surprising addiction. How do flamin’ hot Cheetos affect the body? Sierra branch 1st period December 17, 2012 Work cited page www. cbsnews. com/†¦ flamin-hot-cheetos-under-fire-from-schools/ fox4kc. com/†¦ /report-flamin-hot-Cheetos-cau sing-some-panicked www. huffingtonpost. com/†¦ /flamin-hot-cheetos-banned-california www. girlslife. com/†¦ /Hands-off-Schools-ban-Flamin-Hot-Cheetos abcnews. go. com/†¦ /schools-take-aim-at-popular-flamin-hot-cheetos/ www. webpronews. com/flamin-hot-cheetos-banned-from-schools-20 www. gurl. com/2012/10/18/flamin-hot-cheetos-addictive/ www. businessinsider. com/flamin-hot-cheetos-2012-10 www. foodfacts. com/NutritionFacts/†¦ /Cheetos-Flamin-Hot

Periscope Inventors Sir Howard Grubb and Simon Lake

Periscope Inventors Sir Howard Grubb and Simon Lake A periscope  is an optical device for conducting observations from a concealed or protected position. Simple periscopes consist of reflecting mirrors and/or prisms at opposite ends of a tube container. The reflecting surfaces are parallel to each other and at a 45 ° angle to the axis of the tube. The Military This basic form of periscope, with the addition of two simple lenses, served for observation purposes in the trenches during  World War I. Military personnel also use periscopes in some  gun turrets. Tanks  use periscopes extensively: They allow military personnel to check out their situation without leaving the safety of the tank. An important development, the  Gundlach rotary periscope, incorporated a rotating top, allowing a tank commander to obtain a 360-degree field of view without moving his seat.  This design, patented by  Rudolf Gundlach  in 1936, first saw use in the  Polish  7-TP  light tank (produced from 1935 to 1939).   Periscopes also  enabled soldiers to see over the tops of trenches, thus avoiding exposure to enemy fire (especially from snipers).  During  World War II, artillery observers and officers used specifically-manufactured periscope binoculars with different mountings. More complex periscopes, using  prisms  and/or advanced fiber optics instead of mirrors, and providing magnification, operate on  submarines  and in various fields of science. The overall design of the classical submarine periscope is very simple: two telescopes pointed into each other. If the two telescopes have different individual magnification, the difference between them causes an overall magnification or reduction.​ Sir Howard Grubb   The Navy attributes the invention of the periscope (1902) to Simon Lake and the perfection of the periscope to Sir Howard Grubb. For all its innovations,  USS Holland  had at least one major flaw; lack of vision when submerged. The submarine had to broach the surface so the crew could look out through windows in the conning tower. Broaching deprived the Holland of one of the submarine’s greatest advantages – stealth. Lack of vision, when submerged, was eventually corrected when Simon Lake used prisms and lenses to develop the omniscope, forerunner of the periscope. Sir Howard Grubb, a designer of astronomical instruments, developed the modern periscope that was first used in Holland-designed British Royal Navy submarines. For more than 50 years, the periscope was the submarine’s only visual aid until underwater television was installed aboard the nuclear-powered submarine  USS Nautilus. Thomas Grubb (1800-1878) founded a telescope-making firm in Dublin. Sir Howard Grubbs father was noted for inventing and constructing machinery for printing. In the early 1830s, he made an observatory for his own use equipped with a 9-inch (23cm) telescope. Thomas Grubbs youngest son Howard (1844-1931) joined the firm in 1865, under his hand the company gained a reputation for the first-class Grubb telescopes. During the First World War, demand was on Grubbs factory to make gunsights and periscopes for the war effort and it was during those years that Grubb perfected the periscopes design.

Successful Painting Arcrylics essays

Successful Painting Arcrylics essays Ching Hao once said, "There are six essentials in painting. The first is called spirit; the second , rhythm; the third, thought; the fourth, scenery; the fifth, the brush; and the last is the ink." This brings us to the three main steps to a successful acrylic painting: planning, preparing, and painting, to include all six of the essential elements. The first step to painting with acrylics is planning. Deciding what to paint is the first step of planning for most. Sometimes inspiration comes from just wanting to paint and then deciding what to paint or seeing something first and then deciding to paint it. A small minority of artists simply pick up a brush and start painting without any plan of action. Sometimes this method leads to disastrous results, but the artist usually develops a plan as they go along, eventually acquiring a subject for their piece. For the beginner though, picking a subject or scene is usually the best idea. Once an idea or subject is acquired, sketching it is the next step so that a clearer view can be attained as well as working out any problems with proportion or details. After a sketch is drawn and possible problems worked out, a workplace needs to be found. It needs to be quiet with minimal distractions and a place where there is no danger of your easel being knocked over. It is also a go od idea if it is a place that is easy to clean or doesn't matter if paint gets on the surrounding surfaces. The next main step is preparation. For this step the workplace need to be prepared, for example, plastic laid on the floor or surrounding objects that shouldn't get paint on them. The canvas size you wish to use also needs to be brought to the workplace, as well as brushes and paint. Paper towels, a water bowl and water are also necessary to have for cleaning and using different colors for the same brush. The next step is preparing the canvas. For acrylics there r ...

Theory & Practice in Management Essay Example | Topics and Well Written Essays - 2500 words

Theory & Practice in Management - Essay Example This is due to cultural diversity that can be well explained by Hofstede’s cultural dimensions which include individualism, uncertainty avoidance, power distance index etc (Hofstede, 2005 p 26). This essay is an evaluation of the various roles of a manager and their importance to organizations. As a manger, one is entrusted with various roles which are meant to enhance the progress and smooth running of a business thus facilitating a favorable environment for business progress as well as harmonizing business operations (Pareek, 2000 p 12). The roles include for example supervising and managing staff. In every department in an organization, there must be someone in charge of ensuring that employees perform their responsibilities according to their job description. This is due to the fact that there are those employees who cannot perform unless there is someone senior supervising them (Pareek, 2000 p 20). If this is not done, the organization would lose a lot in terms of time due to the reluctance of the staff to deliver the expected results within the required time frames. In this context, the manager has the responsibility of ensuring that any staff that shows indiscipline is punished according to the organization’s ethics code. The manager also has the responsibility of assigning duties to the various employees so as to ensure that they do not stay idle at any one time (Christiansen, 2002 p 30). He also has the authority of hiring and firing staff depending on there is need to reduce or increase their number may be due to the increase or reduction of the amount of work. This ensures there is a balance between income and expenditure which correlates highly with production. A manager also has the role of advising his employer on the various strategies that can be made to increase production and standards of goods and services. As such, he is an agent of change (Pareek, 2000 p 32).

Creon and Antigone Being Stubborn In Antigone Essay

Creon and Antigone Being Stubborn In Antigone - Essay Example The play also shows how the gods mediate. Creon is punished for passing unreasonable rules. Key conflicts are also illustrated in the play. There is a conflict between the society and individuals. Antigone struggles against the authorities so as to reveal an unjust rule. This exposes a conflict between Antigone, Creon, and the communal customs that perceived that women are weaker than men and cannot participate in political decision-making. There is a conflict between two persons. There is a battle between Antigone and Creon, a representative of the state. Antigone also battles Ismene, who tries to convince her not to perform a burial ceremony for her brother. In addition, Creon quarrels with his son. Moreover, there is a conflict between the supernatural and the person, as Antigone’s household is cursed by the gods. The Antigone’s household fate causes their destruction. Finally, there is a conflict inside a person. For instance, in scene five Creon must relent even if he does not want. Both Creon and Antigone are tremendously stubborn. Their stubbornness causes their demise. Both of them are extremely independent individuals. Creon declines to accept anyone’s views except his own.

How can people be achieved between cultures Research Paper

How can people be achieved between cultures - Research Paper Example John Stuart mill and John Locke advocated for upholding human rights earlier than other scholars. Nevertheless, this does not necessarily mean that they were the one responsible in the formulation of human rights. The universality of human rights cuts across various cultures. Even though appreciation of the rights occurred in the Western world and as characterised in both the American and French revolution, the historical development of human rights is much older (Marek, 2010). In an attempt to understand the current global cultural politics, modern scholars draw insight from modernity. This view holds that modernity originated from the West in a Judaeo Christian setting. The interrelation between economic, scientific, philosophical and artistic revolutions led to an understanding of novel ways about people, the environment and political power. These thoughts did not lead to globalization, but through military skill and economic imperialism the Europeans contributed to modernity (Reus-Smit, 2011). There are many opinions on what constitutes human rights, the perceptions differ from an intellectual or political point of view. Additionally, the differences seem to originate from the historical evolution of human rights. Human rights originate from people with diverse backgrounds. Another view holds that human rights can be divided into; whether based on an individual’s status or status of group, the degree to which people are treated depending on success or acknowledgement, the importance of rights, obligation and thoughts on the interdependency between the two or the emphasis on economic and social rights vs. civil and political rights (Plantilla & Raj, 1997). The result of the cold war ushered in a period with many uncertainties. There was an end to the super power enmity and the North-South divide. Nevertheless, this period concurred with many world problems including unemployment, poverty,

The article The Mountain Man and American Anguish Essay Example for Free

The article The Mountain Man and American Anguish Essay In the article, The Mountain Man and American Anguish in the Journal of Popular Film Television, Patrick McCarthy reflects on movie production and the image of mountain men. Contrary to how mountain men are shown in contemporary American pop culture media, McCarthy claims that there is a greater connection between that period of time and the different cultural challenges we face today. Staying consistent to the tune of his article, McCarthy claims modern media has skewed the reality of the life of the mountain man. He disagrees with how modern American pop culture portrays the mountain man. McCarthy references movies including the â€Å"Adventures of Kit Carson† and â€Å"The Oregon Trail,† as well as other movies, all of which depict mountain men as uncouth ruffians lacking any form of human nature or any civilized attributes. He attempts to illustrate that the mountain men were actually a very real reflection of contemporary society, that is people overwhelmed by lack of any control of their lives or controlled by a sadistic pleasure in inflicting pain. According to McCarthy, many things contributed to these circumstances: remoteness, self debasement and other less than ideal conditions. It resembles current situations in which people feel the overpowering conviction that they are devoid of control over their own life and lack of liberty. The portrayal of mountain men in this fashion should convince contemporary society that finding solutions in adverse situations is within the power of any collective people. All that is necessary is determination and undying resilience. As far as can be ascertained from historical documents, mountain men demonstrated the necessary ability to carve out a living independent of outside help. In The Mountain Man and American Anguish, Patrick McCarthy reveals good insight but is not free from his share of imperfections. The article bases most of its argument on how todays film industry falsely portrays past and present cultures. The article utilizes popular culture to draw people down to earth, in respect to the vast value of how the American populace is viewed in a time of agony. The article has a limited review of the whole picture. It only reviews a limited amount of movies which is important to the picture Hollywood presents. the mountain man, it would be much better if the article  listed movies with a more accurate portrayal of mountain men. Works Cited McCarthy, Patrick. The Mountain Man and American Anguish. Journal of Popular Film

Review Paper on Fault Tolerance in Cloud Computing

Review Paper on Fault Tolerance in Cloud Computing A REVIEW PAPER ON FAULT TOLERANCE IN CLOUD COMPUTING Deepali Mittal Ms. Neha Agarwal Abstract— Cloud computing demand is increasing due to which it is important to provide correct services in the presence of faults also. The Resources in cloud computing can be dynamically scaled that too in a cost effective manner. Fault Tolerance is the process of finding faults and failures in a system. If a fault occurs or there is a hardware failure or software failure then also the system should work properly. Failures should be managed in a effective way for reliable Cloud Computing. It will also ensure availaibility and robustness .This paper aims to provide a better understanding of fault tolerance techniques which are used for managing faults in cloud. It also deals with some existing Fault tolerance model. Index Terms— Cloud Computing, Fault Tolerance, Dependability. I. Introduction Cloud computing is new method which can be used for representing computing model where IT services are delivered via internet technologies . These have attracted millions of users. Cloud storage not only provide us the massive computing infrastructure but also the economics of scale. Such a trend, requires assurance of the quality of data storage services which involves two concerns from both cloud users and cloud service providers: data integrity and storage efficiency. It is much more simple than internet. It is a service that allows user to access applications that actually exist at location other than user’s own computer or other devices on network. There are many benefits of this technology. For example any other company hosts user application. Cloud computing is nothing new as it uses approaches, concepts, and techniques that have already been developed. But on the other side everything is new as cloud computing changes how we invent, develop, deploy, scale, update, maintain, and pay for applications and the infrastructure on which they run. Cloud Computing is an efficient way of computing as it centralizes the storage, memory and processing. Fault tolerance has the property to assess the capability of the system to react graceciouslly to a hardware and software failure which is not expected. In assortment to attain robustness or raptness in cloud computing, failure should be determined and handled carefully.This paper will give basic knowledge about Fault tolerance Approaches.The Methods used for fault management in cloud We also study some existing fault management models which tolerates fault in cloud environment. Then figure out the best model of fault tolerance. Fault tolerance deals with all different approaches that provides robustness ,availaibility and dependability .The major use of enforcing fault tolerance in cloud computing include recovery from different hardware and software failures, reduced cost and also improves performance . Robustness is the property of providing of with an accurate service in an unwanted situation that can arise because of an unexpected system state. Dependability is something that need to be achieved.It is one of the very important aspects for cloud provider.It includes dependability as well as availability.It is related to some of the Quality of service issues delivered by the system. Fault tolerance intent to accomplish robustness and dependability in the cloud environment.Fault tolerance techniques can be classified into types depending on the policies of fault tolerance viz, Proactive Fault Tolerance : Proactive fault tolerance simple means early prediction of the problem before it actually arises. Reactive fault tolerance: This policy handles the failure. The effect of failure is reduced when the failure actually occurs. This could be further divided into two sub-procedures : 1. Error Processing 2. Flaw Treatment The first process eliminates error from the system. Fault treatment tries to prevent faults from getting reactivated . Fault tolerance is accomplished by error processing. Error Processing has two main phases. The first phase is â€Å"effective error processing† which means bringing the effective error back to a latent state and if possible it is done before occurrence of a failure.The Second Phase is â€Å"latent error processing† which aims to ensure that the error is not reactivated. II. Existing Fault Tolerance Approaches In Cloud The different techniques used for fault tolerance in cloud are : Check pointing: It is a good fault tolerance approach .It is used for applications which have a long running time. In check pointing technique , check pointing is done after each change in system state. It is useful when a task is not able to complete. It fails in the middle due to some error. Then that task is made to begin from the most recent check pointed state instead of restarting it from the beginning. Task Migration : There may be a case when a task in not able to complete on the assigned specific virtual machine . When this type of task failure occurs then that task could be moved other machine. This can be performed by using HA-Proxy. Replication: Replication simply means copying. The replica of tasks is executed on distinct resources if the original instance af task fails.It is done to get the actual required result. Replication can be implemented by using various tools. Some of the tools are Hadoop , HA Proxy or Amazon EC2. Self- Healing : A big task can divided into parts .This division is done for better performance. It results in creation of variant application instance.The instances run on distinct virtual machines.In this way automated failure management is done for instances. Safety bag checks: This strategy is quite simple. It blocks the command which does not met the requirements for safe execution or proper working of machine. S-Guard : It is a stream Processing techniques.It makes available more resources. It use the mechanism of Rollback recovery. Check Pointing is done Asynchronously. It is used for distributed environment. S-Guard is performed using Hadoop or Amazon EC2. Retry : A task is made to execute repeatedly .This approach try to re execute the failed job on same machine . Task Resubmission : A task failure can make the complete job also fail. So when a failed task is identified ,it should be submitted to same or either distinct resource for reexecution. Time checker : Time checker is a supervised technique. A watch dog is used. It consider Critical time function. Rescue workflow : This strategy is used for Fault tolerance in workflow execution. Reconfiguration: The configuration of the system is changed in this technique.The faulty component is removed. Resource Co-allocation: It increases the availability of resources. It takes care of multiple resources. Resource allocation is done to complete the execution of task. III. Fault Tolerance Models Various Fault Tolerance Models are designed using these techniques. These techniques are combined with one another and then applied or simply used individually. Some of Existent fault tolerance models are : â€Å"AFTRC A Fault Tolerance Model for Real Time Cloud Computing† is designed by keeping the fact in mind that real time systems have good computation. These systems are also scalable and make use of virtualization techniques which helps in excuting real time applications more effectively.This model is designed by considering the dependability issue. The model make use of proactive fault strategy and predicts the faulty nodes. â€Å"LLFT Low Latency Fault Tolerance † act as a middleware for tolerating faults. It is useful for distributed application which are running in cloud. In this model fault tolerance is provided like a service by cloud providers. Applications are replicated by middleware. In this way replication helps in handling of faults for different applications. â€Å"FTWS Fault Tolerant WorkFlow Scheduling† is a model based on replication approach. It also makes use of resubmission technique. A metric is maintained for checking the priority of tasks and they are submitted accordingly. The principle of workflow is used in this model. Workflow means a series of task executed orderly. Data dependency decides the order. Fault management is done while the workflow is scheduled. â€Å"FTM† is one of the most flexible model. It delivers fault tolerance as on demand service. The user has a advantage that without having known the working of model ,they can specify the required fault tolerance. It is mainly designed for dependability issues. It consists of various components. Each component has its own functionality. †Candy† is component base availability modeling frame work. It is mainly designed for availaibility issues. System modelling language is used to construct a model from specifications. This is done semi automatically. â€Å"Vega-warden† is a uniform user management system. It creates global work space for variant applications and distinct infrastructure.This model is constructed for virtual cluster base cloud computing environment to overcome the 2 problems: usability and security which arise from sharing of infrastructure. â€Å"FT-Cloud† has a mechanism of automatic detection of faults.It makes use of frequency for finding out the component. â€Å"Magi-Cube† is a kind of architecture for computing in cloud environment.It is designed for dependability,expenditure and performance issues.All three issues are related to storage.This architecture provides highly reliable and less redundant storage. This storage system is done for metadata handling.It also handles file read and write. IV. Fault Tolerant Model for Dependable Cloud Computing Fault Tolerant Model for dependable cloud computing is a model designed for dealing with failures in cloud . As we all know Cloud Computing Environment is made up of virtual machines or you can say nodes. The applications run on these nodes. Using this model faulty nodes are detected and replaced by correctly performing nodes. This is done for real applications. Now on what criteria the model can decide a node to be faulty ? There can be various parameters for detecting faulty node but this model makes use of dependability or dependability measurement. The criteria could be changed according to user’s requirement. A. Working of Model The model is designed for X virtual machines. X distinct algorithms run on the X nodes. Input buffer feeds the data to nodes. The input data is then moved onwards to all the nodes simultaneously. When the node gets the input it starts its operation. It performs some functions as designed or stated by the algorithm . In other words , the algorithm runs on nodes and gives a result .The Funtioning of every module is different. Accepter Module This module tests the nodes for correct result. It verifies the result of algorithms. If the result is faultless or as required then the result is forwarded further for evaluation of dependability.The appropriate result is sent to timer module. The inappropriate result is not forwarded instead signal is sent. Timer Module This module has a timer set for every node .It checks the time of result.If the result is generated before the time set or within that assigned time the only it forwards the result. Dependability Assessor This module is responsible for checking of dependability of nodes. At the starting of system the dependability for each node is set to it maximum that is cent percent. When computations are performed the dependability of nodes dynamically changes.The dependability is decided on the basis of time and correctness of result. Dependability increases if the result is accurate and on time. The highest and lowest limit of dependability is set in the beginning. The node with dependability value less than the lowest dependability is replaced. It also sends a message to resource manager. The result of dependability assesers forwards the results to descision maker module. Decision Maker It gets the result from dependability assessors. A selection of node is done from all perfect nodes. The node which has the maximum dependability is selected. It makes the comparison between the dependability level of nodes and system dependability. System dependability is important to be attained by a node. In case all the node fails to achieve the system dependability then a failure notification is issued. A failure notification means that all the nodes have failed for this computation cycle. Now backward recovery is done using check points .Decision maker also asks the resource manager to replace the node with lowest dependability with the new one. Check Pointing Check Pointing saves the state of system. It is done at regular small intervals. It is helpful in a scenario when a system fails completely. The strategy helps in automatic recovery form the check pointer state. This automatic recovery is done only when all the nodes fails. The system continues to work properly with rest of the nodes. Fig .1.Fault Tolerant Model For Dependable Cloud Computing B. Mechanism Of the Model Dependability Assessment Algorithm Begin Initially dependability:=1, n :=1 Input from configuration RF, maxDependability, minDependability Input nodestatus if nodeStatus =Pass then dependability := dependability + (dependability * RF) if n > 1 then := n-1; else if processing node Status = Fail then dependability: = dependability – (dependability * RF * n) n: = n+1; if dependability >= max Dependability then Dependability: = max Dependability if dependability Call Add new node ( ); End Decision Mechanism Algorithm Begin Initially dependability:=1, n :=1 Input from RA nodeDependability, numCandNodes Input from configuration SRL bestDependability := find_dependability of node with highest dependability if bestDependability >= SRL status := success else perform_backward_recovery call_proc: remove_node_minDependability call_proc: add_new_node End C. Result In the first cycle, both VirtualMacine-1 and VirtualMachine-3 have the same dependability, but the result of VM-1 has been selected as it has a lower IP address. VM-3 output was selected by DM from cycle 2 to 4, as it has the highest dependability among competing virtual machines. In cycle 5 VirtualMachine-3 still has the highest dependability, but it is not selected. Because its result was not passed by AT and TC, so consequently, it was not among competing virtual machines. TABLE I : Result v. Conclusion and future work Tolerance of faults makes an important problem in the scope of environments of cloud computing. Fault tolerance method activates when a fault enters the boundaries i.e theoretically these strategies are implemented for detecting the failures and make an appropriate action before failures are about to occur. I have looked after the need of fault tolerance with its various methods for implementing fault tolerance. Various called models for fault tolerance are discussed .In the present scene, there are number of models which provide different mechanisms to improve the system. But still there are number of problems which requires some concern for every frame work. There are some drawbacks non of them can full fill the all expected aspects of faults. So might be there is a possibility to carried over the drawbacks of all previous models and try to make a appropriate model which can cover maximum fault tolerance aspect. References AnjuBala, InderveerChana,† Fault Tolerance- Challenges, Techniques and Implementation in Cloud Computing† IJCSI International Journal of Computer Science Issues, Vol. 9, Issue 1, No 1, January 2012 ISSN (Online): 1694-0814 www.IJCSI.org Sheheryar MalikandFabriceHuet â€Å"Adaptive Fault Tolerance in Real Time Cloud Computing† 2011 IEEE World Congress on Service Ravi Jhawar, Vincenzo Piuri, Marco Santambrogio,† A Comprehensive Conceptual System-Level Approach to Fault Tolerance in Cloud Computing†, 2012 IEEE, DOI 10.1109/SysCon.2012.6189503 P. Mell, T. Grance. The NISTdefinition of cloud computing. Technical report, National Institute of Standards and Technology, 2009. Wenbing Zhao, Melliar-Smith, and P. M. Moser, â€Å"Fault tolerance middleware for cloud computing,† in 3rd International Conference on Cloud Computing (CLOUD 2010). Miami, FL, USA, 2010. R. Jhawar, V. Piuri, and M. D. Santambrogio, â€Å"A comprehensive conceptual system level approach to fault tolerance in cloud computing,† in Proc. IEEE Int. Syst. Conf., Mar. 2012, pp. 1–5. M. Castro and B. Liskov, â€Å"Practical Byzantine fault tolerance,† in Proc.3rd Symp. Operating Syst. Design Implementation, 1999, pp. 173–186.